|  Next  |  Last
Pages: 1 2 3 4 5 6 7 8 9 10 11
Which welder
Just finished doing the mods to my SIP Migmate 130. Basically, changed the crappy motor drive system to PWM. Used a board from Jaycar. It's now rock steady at as slow a speed as I'll need. Downside is the feed speed no longer changes with the power setting - but since it never seemed to be correct anyway, no big de... 13 Aug 2010 20:11
Advice from the usual suspects, please ?
Hi all. Missus has got it into her head that she fancies a Vee Dubbya Tow-Rag. Not a new one. Probably something around 06. Anything particular to look out for ? Anything considered particularly bad about them ? Petrol or diesel ? Engine size ? Any thoughts - practical, owning, or repairing - appreciated. What... 13 Aug 2010 09:15
Bit OT: Auto-electrics
My nephew wants to be an auto-electrician and its his birthday soon and I thought I'd buy him a book. could anyone recommend a book for a beginner ? ... 11 Aug 2010 10:24
Tax on a 2.0L ldv petrol convoy 400 crewbus
Hi Anyone know what the road tax is for the above? Twin wheel at rear if that makes a diff ... 10 Aug 2010 18:04
June 2001 3 door Focus 2.0 ESP handbrake cable
Last job to do before an MOT is replace the above (rear disc brake model) because it's seized on one side. I've got the right cable (I hope) and I'm only replacing the back section to both sides not the bit that connects to the handbrake. I'm hoping it can all be done from underneath without removing the handbr... 10 Aug 2010 09:09
2002 Fiesta Speedo/Odo EEPROM replacement (long)
Mrcheerful wrote: Colin Stamp wrote: Hi all, I've got problems with the wife's car ('52 1.4 Fiesta Zetec, no ABS). [snip] this thread has an answer that makes sense: faulty abs module which is in between the VSS and the dashboard. http://www.fordownersclub.com/forums/index.php?showtopic=... 6 Aug 2010 16:02
Anyone know old 2LToyota petrol lumps (and towbars) please?
Hi, Potential SIL has recently bought an old (83,YN65 3Y) but fairly well loved for most of it's life Toyota HiLux 4x4, 2L petrol with just over 100K miles on the clock. He's just driven it back down from Scotland to Herts, admittedly fairly well loaded (and probably not very 'gently' knowing him) and it took... 11 Aug 2010 07:08
Noise From Rear - Possible Fuel Tank
Posted in wrong group (misc) so apologies for cross post. Passat 2004 130 TDi: quite a racket coming from what sounds like the fuel tank area. I'll have to get under it at the weekend and investigate, but it sounds like the rear o/s area. If I boot it, it goes away for a second or two and comes back. Car runs and... 12 Aug 2010 10:25
Corsa wipers going slow
Daughter rang last night and said her 04 1.3 cdti corsa windscreen wipers had started only working slowly. Before I head over for a look anyone had this problem before. If it means a new wiper motor mechanism how easy to change and anyone an idea of cost. Thanks Bob ... 12 Aug 2010 04:59
Ford Focus dipstick tube
June 2001 Focus 2.0 ESP. I've been running an ST170 exhaust manifold which a friend fitted for me a few years ago but I'm putting it back to standard at the moment. The dipstick tube had to be moved to to the centre of the cylinder head to fit the ST manifold but as I didn't do the job I don't know where it st... 4 Aug 2010 12:33
Dishonest about selling a car
What amusing phone call might be made to a not very nice bloke and his not very nice pal, who are re-advertising a car for sale that actually looks reasonably good, supposedly a lady owner, and only a small milage on it; but in reality is a worn out piece of rubbish. And they know this full well. It's easily g... 4 Aug 2010 12:33
New tyres with old ones
The manufacturer of my car specified Michelin Pilot Primacy tyres as the OEM so I thought I'd replace like for like. Unfortunately though, I needed all four replacing and just could not afford it all at once. Yesterday I had three brand new ones put on - the two fronts (it's a front-wheel drive car) and the nea... 4 Aug 2010 09:16
Headliner falling off
On my '88 Audi 100 avant headliner (just the cloth part) is starting to peel off near the fifth door. I can just press it back by hand, and it seems to stick for a while, and than it starts to separate again. Can I glue it back, or what can I do? -- ___ ____ /__/ / \ ** Registrovani kor... 3 Aug 2010 01:43
 |  Next  |  Last
Pages: 1 2 3 4 5 6 7 8 9 10 11