Next: technical ponderings.
From: CJ on 31 Mar 2006 20:42 Re an earlier enquiry. Does anyone know where I can get the software and cable for a single point Emmegas system in the UK? I believe the generic electrics are made by either Digitech or Dynatech (can't remember which name I was told ). The system has been balanced as well as it can be, manually (Neil Maxwell, Stirling), but I need to connect it to a laptop to fine tune it. I've tried the Emmegas Italian website but there's not much help there regarding main UK Distributors etc ... Any help would be greatly appreciated. Regards, Colin
From: Dave Griffs on 1 Apr 2006 12:44 "CJ" <jayjackson(a)blueyonder.co.uk> wrote in message news:jUkXf.302885$YJ4.198852(a)fe2.news.blueyonder.co.uk... > Re an earlier enquiry. Does anyone know where I can get the software and > cable for a single point Emmegas system in the UK? > > I believe the generic electrics are made by either Digitech or Dynatech > (can't remember which name I was told ). The system has been balanced as > well as it can be, manually (Neil Maxwell, Stirling), but I need to > connect it to a laptop to fine tune it. > > I've tried the Emmegas Italian website but there's not much help there > regarding main UK Distributors etc ... > > Any help would be greatly appreciated. > > Regards, > > Colin > Give these a try, located in birmingham but do mailorder. http://www.hkl-gaspower.co.uk/ They supplied my old emmegas system.
From: CJ on 1 Apr 2006 22:04 "Dave Griffs" <Davenospam(a)ntlworld.com> wrote in message news:5_yXf.1112$8o.668(a)newsfe6-win.ntli.net... > > "CJ" <jayjackson(a)blueyonder.co.uk> wrote in message > news:jUkXf.302885$YJ4.198852(a)fe2.news.blueyonder.co.uk... >> Re an earlier enquiry. Does anyone know where I can get the software and >> cable for a single point Emmegas system in the UK? >> >> I believe the generic electrics are made by either Digitech or Dynatech >> (can't remember which name I was told ). The system has been balanced as >> well as it can be, manually (Neil Maxwell, Stirling), but I need to >> connect it to a laptop to fine tune it. >> >> I've tried the Emmegas Italian website but there's not much help there >> regarding main UK Distributors etc ... >> >> Any help would be greatly appreciated. >> >> Regards, >> >> Colin >> > > > Give these a try, located in birmingham but do mailorder. > > http://www.hkl-gaspower.co.uk/ > > They supplied my old emmegas system. > Cheers Dave, I'll give them a try on Monday. Regards, Colin
From: CJ on 4 Apr 2006 16:50 "Dave Griffs" <Davenospam(a)ntlworld.com> wrote in message news:5_yXf.1112$8o.668(a)newsfe6-win.ntli.net... > > "CJ" <jayjackson(a)blueyonder.co.uk> wrote in message > news:jUkXf.302885$YJ4.198852(a)fe2.news.blueyonder.co.uk... >> Re an earlier enquiry. Does anyone know where I can get the software and >> cable for a single point Emmegas system in the UK? >> >> I believe the generic electrics are made by either Digitech or Dynatech >> (can't remember which name I was told ). The system has been balanced as >> well as it can be, manually (Neil Maxwell, Stirling), but I need to >> connect it to a laptop to fine tune it. >> >> I've tried the Emmegas Italian website but there's not much help there >> regarding main UK Distributors etc ... >> >> Any help would be greatly appreciated. >> >> Regards, >> >> Colin >> > > > Give these a try, located in birmingham but do mailorder. > > http://www.hkl-gaspower.co.uk/ > > They supplied my old emmegas system. > Hi Dave, I contacted HKL today and they have loads of stuff on order but not a lot on the shelves so they put me in touch with Hilton Autogas in Cannock. The good news is that my system can be one of only two for that model of Rangie ... worst case scenario - I need the software and cable type of set-up to connect to a laptop (approx ?100) ... best case scenario - a small meter-type adjuster (approx ?10). I've to give them a call with the relevant part numbers when I get the Rangie back from the 'doctor's' and they'll be able to tell which system I need. Thanks again for the contact. Regards, Colin
From: Dave Griffs on 4 Apr 2006 17:15 > Hi Dave, > > I contacted HKL today and they have loads of stuff on order but not a lot > on the shelves so they put me in touch with Hilton Autogas in Cannock. > > The good news is that my system can be one of only two for that model of > Rangie ... worst case scenario - I need the software and cable type of > set-up to connect to a laptop (approx ?100) ... best case scenario - a > small meter-type adjuster (approx ?10). > > I've to give them a call with the relevant part numbers when I get the > Rangie back from the 'doctor's' and they'll be able to tell which system I > need. > > Thanks again for the contact. > > Regards, > > Colin > Glad I've been of some help, let me know how you get on. Dave
|
Pages: 1 Next: technical ponderings. |