From: Feral on
John_H wrote:

> A deft hand with the stellite would probably increase the number
> significantly! The inlet needs it even worse. :)

I was referring to the degraded thickness of the ex-valve
stem. It appears to have the potential to bend (again), I will
thicken the heads of both though.

Permatex LMF resides on the shelf, just above my head.
Do you think Stellite is better? And for what reason/s.

--
Take Care. ~~
Feral Al ( @..@)
(\- :-P -/)
((.>__oo__<.))
^^^ % ^^^
From: Noddy on

"jonz" <fj40(a)diesel.com> wrote in message news:4ab03ddc(a)dnews.tpgi.com.au...

> remember what i said to u about your, you`re, and baiting?..no?..gone
> again softy....btw, speak english?, u can *hear* me?? `mazing...

Is it possible for you to make *one* post in anything other than grade three
text speak?

--
Regards,
Noddy.


From: John_H on
Feral wrote:
>John_H wrote:
>
>> A deft hand with the stellite would probably increase the number
>> significantly! The inlet needs it even worse. :)
>
>I was referring to the degraded thickness of the ex-valve
>stem. It appears to have the potential to bend (again), I will
>thicken the heads of both though.
>
>Permatex LMF resides on the shelf, just above my head.
>Do you think Stellite is better? And for what reason/s.

I don't know what Permatex LMF is, but if it's the liquid metal stuff
sold for restoring threads I'd leave it right where it is! :)

Stellite is the traditional way of reclaiming valve faces, restoring
the margins, etc. It's been around since the 1930's and was widely
used until at least the late '70's, when valve work fell into general
decline.

It's straight forward enough for a keen DIYer to use. Traditional
method of application is an oxy torch and you need the appropriate
stone to grind it. If you've ever seen a white valve refacer stone
laying about, that's what it's for (at one time almost every valve
refacer would've had one as an accessory).

https://www.mahle.com/C12572E600480825/CurrentBaseLink/N27F4G4N691STULEN
Scroll down through the pictures to see how a stellite faced valve
should look after welding and before grinding. It's a brand new part
in this example.

The thin part of the stem behind the head could probably be restored
by powder spraying using the simple oxy torch attachment available for
the purpose. (These days you can probably get stellite in powder form
as well, though I'd still prefer to use a stick.)

OTOH, for the rough examples you've got to work with I'd probably just
go through the bucket full of old valves until I found something that
could be remachined to fit. Really depends on how many of the
original parts you want to retain.

--
John H
From: Noddy on

"Atheist Chaplain" <abused(a)cia.gov> wrote in message
news:4ab0432b(a)news.x-privat.org...

> I'm not the one making the claims that are then not being substantiated,
> so what was the class called before 1976 ??

Hmmm... You might be waiting a while for an answer to that, as right now I
expect he's googling so hard to come up with something smoke is coming out
the back of his computer :)

--
Regards,
Noddy.


From: jonz on
Noddy wrote:
> "jonz" <fj40(a)diesel.com> wrote in message news:4ab03ddc(a)dnews.tpgi.com.au...
>
>> remember what i said to u about your, you`re, and baiting?..no?..gone
>> again softy....btw, speak english?, u can *hear* me?? `mazing...
>
> Is it possible for you to make *one* post in anything other than grade three
> text speak?
~~~~~~~~~~~~~~~~~
not where u are involved....`tis called the KISS principle...comprende?
>
> --
> Regards,
> Noddy.
>
>


--
jonz
"Usenet is like a herd of performing elephants with diarrhea - massive,
difficult to redirect, awe-inspiring, entertaining, and a source of mind
- boggling amounts of excrement when you least expect it." - Gene
Spafford,1992