From: Ashton Crusher on
On Sat, 6 Mar 2010 12:02:39 -0800, "Cameo" <cameo(a)invalid.invalid>
wrote:

>"Jim Warman" <mechanic(a)telusplanet.net> wrote:
>>
>> Have we seen problems with Fords drive by wire? A very few, but
>> yes.... No unintended accelerations have been (AFAIK) documented.
>
>Have we seen problems with Toyota outside of the US? Are they making
>different cars for other markets?

Do the places "outside" the US have the same regulatory and reporting
structure for such defects? If not, then it's not likely you "see"
problems.
From: David Skelton on
We have had three cars (one made in 1997, the second in 2002 and the third
in 2004) that sometimes used to open the throttle on the 'over run',
possibly to reduce emissions.

It was unnerving approaching junctions.

All three had mechanical throttle cables, but also motors built into the
throttle body to drive the throttle plate open.

Two were Fords, the other was a Daewoo with a Suzuki engine.

Best wishes

David



--- news://freenews.netfront.net/ - complaints: news(a)netfront.net ---
From: John Burns on
You're a bit behind the times, our E34 Alpina B10 had an electronic
throttle, it was a 1989 car!

> if you buy all this fear-mongering idiocy that electronic throttle is a
> problem, and that brakes, transmissions and ignition kill switches can
> all simultaneously fail causing a driver to lose control, it might be
> worth auto manufacturers of all stripes to adopt a slightly different
> implementation of electronic throttle [e.t.] - if not for mechanical
> reasons, but to shut the idiots up.


--
Who needs a life when you've got Unix? :-)
Email: john(a)unixnerd.demon.co.uk, John G.Burns B.Eng, Bonny Scotland
Web : http://www.unixnerd.demon.co.uk - The Ultimate BMW Homepage!
Need Sun or HP Unix kit? http://www.unixnerd.demon.co.uk/unix.html
www.Strathspey.co.uk - Quality Binoculars at a Sensible price
From: Don Stauffer on
jim beam wrote:
> if you buy all this fear-mongering idiocy that electronic throttle is a
> problem, and that brakes, transmissions and ignition kill switches can
> all simultaneously fail causing a driver to lose control, it might be
> worth auto manufacturers of all stripes to adopt a slightly different
> implementation of electronic throttle [e.t.] - if not for mechanical
> reasons, but to shut the idiots up.
>
> first, lets understand e.t. functionality:
>
> 1. open the throttle when demanded
> 2. close throttle when demanded
> 3. allow "demand" to account for additional requirements like
> a. de-throttle on shifting for automatics,
> b. throttle appropriate to load at high demand [eg. full throttle at
> low rpms can choke an engine and significantly reduce output - thus
> de-throttle until revs support full open]
>
> if we analyze the above [which is not exhaustive, but representative],
> we find that in almost all situations, an e.t. needs to be more closed
> than demanded, but seldom, if ever, more open. thus the "solution" to
> the fear-mongering might be to have the throttle opened mechanically -
> i.e. old fashioned cable linkage, but have the computer control a closer
> device. thus, all the above can be implemented electronically, but
> whenever the driver lifts their foot, the mechanical closure cannot be
> over-ridden. and the throttle can never be more open than the
> mechanical throttle command.
>
> this would not only address the "potential" for a runaway failure
> [although how exactly a computer is supposed to fail such that it won't
> switch off, disables brakes, disables transmission select, but still
> runs its injection code is something i have never seen explained, even
> by the most strident "but it must be the electronics" crowd], but it
> would also remove the single most annoying thing i have ever experienced
> in any vehicle driving experience: chevy's idiot idea that they need a
> multi-second delay between foot pedal movement and e.t movement. anyone
> that's ever tried to drive a chevy hhr on a winding mountain road knows
> what i mean.
>
> y'all can now wait for at least 10 years for arrival, but i throw it out
> there for what it's worth.
>
>
In my Prius I am unaware of any 'kill' switches. There is just the
normal power on-off switch. It is a simple sp-st switch that acts
(through the computer) as an alternating switch.

From: Bill Putney on
jim beam wrote:
> On 03/06/2010 08:26 PM, Bill Putney wrote:

>> I don't necessarily disagree with the rest of your post, but that part
>> of your post is definitely incorrect. Have you ever played with your
>> power brakes while simultaneously pressing the accelerator? Anything
>> more than one or two initial stabs at the brakes depletes the vacuum
>> stored in the booster, and with even slight power simultaneously being
>> demanded of the engine, the vacuum is not enough to directly power the
>> brakes, much less re-charge the vacuum in the booster.
>
> i have done this. with the engine off, the vacuum remains until the
> pedal is released - thus if you stomp the pedal and keep it there, you
> don't need to keep replenishing the vacuum. and you will stop the car.
> with the engine running, there is no vacuum issue, and the brakes are
> still powerful enough to stop the car. on my honda anyway.

I have real trouble believing that a large majority of people would, in
a sudden inadvertent acceleration situation, be content to press the
brakes one time and not try to pump them once or twice. After that, the
brakes will be almost totally ineffective because of loss of vacuum.

>> People don't believe that, but try it on your car: On a deserted road at
>> highway speed, stab the brake pedal a couple of times while holding the
>> gas pedal down a little bit to load the engine slightly (this works
>> anywhere from slight to WOT throttle). I guarantee you (unless your
>> brake booster gets its vacuum from something besides the intake vacuum -
>> like a separate electric motor-driven vacuum pump) that after two or
>> more stabs at the brake pedal, the braking power will be extremely low -
>> so low that the engine will have no trouble overpowering the brakes. No
>> vacuum in the booster essentially equals no brakes.
>
> with respect, i think you're confusing vacuum with fade...

No - I'm not. While you could certainly induce fade with a certain
prolonged script of usage of the brakes, what I'm talking about is true
over what I would say would be the real world typical scenario (before
the fade issue becomes real - which - yes - it would over a longer
period, but not likely if the 2 or 3 stabs had already occurred in the
relatively short period that I would expect). It is a fact that the
vacuum cannot recharge with almost no vacuum in the intake - it doesn't
recharge by magic. I guarantee you that after a third stab of the
brakes on an engine vacuum-driven power brake car, the brakes will loose
the fight with the engine - fade has nothing to do with that over the
first few seconds that we would be talking about (during which the first
2 or 3 stabs would occur real world).

i've
> experienced that too, one particular time on a major hill in san
> francisco approaching a busy intersection. yes, it's scary stuff. but
> when i changed the pads on my civic from after-market to oem, all fade
> problems disappeared. even fully loaded, repeatedly decelerating from
> speed. [i learned my "honda oem is best" lesson that way.]
>
>
>>
>> Also, once the booster is depleted of vacuum during that experiment, the
>> vacuum charge in the booster will remain depleted until a second or so
>> after the throttle is released - IOW - deplete it and continue applying
>> the throttle (again - doesn't have to be anywhere near WOT) for several
>> seconds. Every once in a while, while still applying the throttle, try
>> the brakes again. You will not have any effective braking until *after*
>> you release the throttle.
>>
>> I urge anyone who doesn't believe what I claim above to try it before
>> commenting.
>
> i have. my results and comments are as above.

And both of us could design the script to create either end result we
wished. I submit that in the real world, most people would try pumping
the brakes in desperation if the sudden acceleration scenario actually
happened - the depleting stabs would occur before fade became a factor.

--
Bill Putney
(To reply by e-mail, replace the last letter of the alphabet in my
address with the letter 'x')