From: Dave Plowman (News) on
I'm after a ready made housing to take a standard size car radio - not for
use in a car, though. Needs to be fairly strong, and a full box rather
than three sides only type for under shelf mounting. The usual places
don't seem to have anything.

--
*Wrinkled was not one of the things I wanted to be when I grew up

Dave Plowman dave(a)davenoise.co.uk London SW
To e-mail, change noise into sound.
From: Tim.. on

"Dave Plowman (News)" <dave(a)davenoise.co.uk> wrote in message
news:4ec9a94cf7dave(a)davenoise.co.uk...
> I'm after a ready made housing to take a standard size car radio - not for
> use in a car, though. Needs to be fairly strong, and a full box rather
> than three sides only type for under shelf mounting. The usual places
> don't seem to have anything.
>

Maplin used to do sometyhing like this... not sure if they still do though..

Tim.


From: Lin Chung on
Dave Plowman wrote:
> ....ready made housing....standard size car radio - not for use in a
> car....fairly strong, and a full box...for under shelf mounting.


Send an e-mail to these people. Their catalogue is more comprehensive
than those from RS or Farnell. They might be able to point you in the
right direction:
http://www.okw.co.uk/

--
Lin Chung.
[Paste ntlworld over the Water Margin to send a private e-mail.]




From: Duncan Wood on
On Mon, 26 Mar 2007 22:14:56 +0100, Lin Chung
<lin.chung(a)the.Water.Margin.com> wrote:

> Dave Plowman wrote:
>> ...ready made housing....standard size car radio - not for use in a
>> car....fairly strong, and a full box...for under shelf mounting.
>
>
> Send an e-mail to these people. Their catalogue is more comprehensive
> than those from RS or Farnell. They might be able to point you in the
> right direction:
> http://www.okw.co.uk/
>


Surely 6mm hex grip birch flightcasing is the way to go?
From: Dave Plowman (News) on
In article <op.tptfx8w4yuobwl(a)lucy>,
Duncan Wood <newsto(a)dmx512.co.uk> wrote:
> On Mon, 26 Mar 2007 22:14:56 +0100, Lin Chung
> <lin.chung(a)the.Water.Margin.com> wrote:

> > Dave Plowman wrote:
> >> ...ready made housing....standard size car radio - not for use in a
> >> car....fairly strong, and a full box...for under shelf mounting.
> >
> >
> > Send an e-mail to these people. Their catalogue is more comprehensive
> > than those from RS or Farnell. They might be able to point you in the
> > right direction:
> > http://www.okw.co.uk/
> >


> Surely 6mm hex grip birch flightcasing is the way to go?

It's not for me so has to be a plug and play sort of thing. ;-)

--
*INDECISION is the key to FLEXIBILITY *

Dave Plowman dave(a)davenoise.co.uk London SW
To e-mail, change noise into sound.