Prev: FAIL CO2 EMISSIONS TEST
Next: Kwik-fit and a puncture.
From: Usenet Nutter on 9 Nov 2009 09:07
On Mon, 09 Nov 2009 12:37:22 +0000, Paul <Paul1231392(a)hotmail.com>
wrote:

>Usenet Nutter wrote:
>> On Sun, 08 Nov 2009 23:18:32 +0000, Paul <Paul1232hssspam(a)hotmail.com>
>> wrote:
>>
>>> I've been having problems for about a month now. My local non franchised
>>> garage told me it was a very common problem. They put 2 clips on and
>>> they both came off again within a week. I have now used a cable tie to
>>> prevent the lateral movement of the hinge and it seems to be working.
>>> Low tech but effective.
>>
>> Hope you keep some ties in the glove box just in case !!!
>
>
>If I had a fiesta I might, but those where quotes of another site! ;-)

Indeed they were ..My mistook
From: Nickname unavailable on 11 Nov 2009 16:47
> don't be so quick to condemn the slave as I have heard of problems where the
> master cylinder seals flip inside out and give your fault.  The slave is a
> really major job to do and rather expensive.  master cylinder is much
> cheaper and easier, so cross your fingers.

Ah, how would I check this though? Garage wants £160 plus parts.
From: Mrcheerful on 11 Nov 2009 18:47
Nickname unavailable wrote:
>> don't be so quick to condemn the slave as I have heard of problems
>> where the master cylinder seals flip inside out and give your fault.
>> The slave is a really major job to do and rather expensive. master
>> cylinder is much cheaper and easier, so cross your fingers.
>
> Ah, how would I check this though? Garage wants �160 plus parts.

to do what?


First  |  Prev  | 
Pages: 1 2 3
Prev: FAIL CO2 EMISSIONS TEST
Next: Kwik-fit and a puncture.